Installer quote — 450 m² plot
The same design from the installer's side: a quote with your own margin, a labour estimate and a PDF report ready to send to the client.
Loads this design into the editor — rotate it, change it, recompute it your way.
At a glance
- Watered area
- 450 m²
- Sprinklers
- 21
- Zones
- 5
- Coverage
- 96.7%
- Uniformity (CU)
- 69.7%
- Water supply
- 4 bar · 40 l/min
- Pipe
- 221 m
- Overspray outside lawn
- 9.5 m²
- Material cost
- 4,217 zł
- Estimated labour
- 41.1 h
The total includes a 25% margin applied to catalogue part prices.
The rule this demonstrates
The margin is yours and visible only to you — the quote is computed from catalogue part prices and your markup is applied to the whole in one place.
What this design does not show
The PDF report does not yet carry your company logo — that feature does not exist. The cover says IrriForge.
Zones and hydraulics
| Zone | Heads | Flow | Pipe | Velocity | Pressure at head |
|---|---|---|---|---|---|
| Valve 1 | 4 | 20.2 l/min | Ø20 | 1.1 m/s | 3.8 bar |
| Valve 2 | 2 | 5.8 l/min | Ø20 | 0.3 m/s | 4 bar |
| Valve 3 | 7 | 25.4 l/min | Ø20 | 1.4 m/s | 3.1 bar |
| Valve 4 | 6 | 24.5 l/min | Ø20 | 1.3 m/s | 3.3 bar |
| Valve 5 | 2 | 9.6 l/min | Ø20 | 0.5 m/s | 4 bar |
Bill of materials
| Item | Qty |
|---|---|
| Hunter MP Rotator MP2000 (135°) | 1 szt |
| Hunter MP Rotator MP3500 (180°) | 1 szt |
| Hunter MP Rotator MP3000 (180°) | 1 szt |
| Hunter MP Rotator MP2000 (180°) | 1 szt |
| Rain Bird R-VAN RVAN-LCS (0°) | 2 szt |
| Rain Bird R-VAN RVAN18 (180°) | 4 szt |
| Rain Bird R-VAN RVAN18 (90°) | 3 szt |
| Rain Bird R-VAN RVAN24 (180°) | 4 szt |
| Rain Bird R-VAN RVAN18 (45°) | 1 szt |
| Rain Bird R-VAN RVAN24 (90°) | 3 szt |
| Hunter Pro-Spray 04" | 4 szt |
| Rain Bird 1800-04" | 17 szt |
| Swing pipe connection Ø16 mm | 21 szt |
| PE pipe 20 mm | 221.4 m |
| Solenoid valve (per zone) | 5 szt |
| Valve box (manifold, up to 4 valves) | 2 szt |
Material prices are indicative (engine price list) and exclude labour.
How this design was made
The site geometry (lawn, house, paths, beds, tap) was drawn the way a user would draw it. Everything else — sprinkler placement, nozzles, arcs, zoning, pipe routes, hydraulics and the bill of materials — was computed by the IrriForge engine from the Hunter and Rain Bird design manuals. The numbers on this page are generated by a script in the repository, so a change in the engine or the catalogue changes them immediately.
Variant “Rain Bird R-VAN + Hunter MP Rotator (MP2000–3500) · economy (fewest heads) · central” of 3 offered by auto-design.